Culmback Dam, Washington, USA

Home / USA / Washington / Culmback Dam

Quick Facts About Culmback Dam

Location: Snohomish, Washington
Coordinates: 47.974917, -121.685995
River: Sultan River, Skykomish River
Primary Purpose: Hydroelectric
Type: Rockfill
Commissioned: 1983
Dam Height: 262 ft (80 m)
Dam Length: 640 ft (195 m)
Dam Capacity: 193,440 acre-ft (238,604 Ml)
Condition Assessment: Satisfactory

Culmback Dam Map

Here is a map of Culmback Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Culmback Dam Information

Culmback Dam is a rockfill dam located about 16 miles from Sultan, Wa, Snohomish, Washington.

The dam, which is on the Sultan River, Skykomish River, was primarily built for Hydroelectric purposes, but also serves for Recreation, Water Supply and Flood Risk Reduction benefits.

The dam was designed by R.W. BECK & ASSOCIATES and commissioned in 1983 and is currently owned by PUD #1 of Snohomish County, WA.

Culmback Dam Structure

The Culmback Dam is approximately 640 feet (195 m) long, 262 feet (80 m) high and has a structural volume of 740,000 cubic yards (565,771 cubic metres).

Culmback Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 153,260 acre-ft (189,043 Ml) and maximum capacity of 193,440 acre-ft (238,604 Ml).

The surface area of the reservoir is 1,870 acres (757 ha) and the total catchment area is 68 square miles (176 square kilometres).

Culmback Dam Spillway

The dam has a 92 feet (28 m) wide uncontrolled spillway with a maximum discharge capacity of 57132 cubic feet per second (1618 cubic metres per second).

Culmback Dam Compared to Four Famous American Dams

Culmback Dam
Snohomish, Washington
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 262 730 550 357 216
Length (Ft) 640 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 193,440 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 68 167,800 74,100 3,611 108,355

Culmback Dam Weather

Current Conditions at Culmback Dam

Failed to fetch current weather data.

7-Day Forecast for Culmback Dam

Failed to fetch weather forecast data.

Culmback Dam Frequently Asked Questions

In which state is the Culmback Dam?

Culmback Dam is in Washington.

In which county is the Culmback Dam?

Culmback Dam is in Snohomish County.

How high is the Culmback Dam?

Culmback Dam is 262 feet high.

How long is the Culmback Dam?

Culmback Dam is 640 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG