Cushman No 1 Dam

Cushman No 1 Dam Quick Facts

Location: Mason, Washington
Coordinates: 47.422835, -123.222565
River: North Fork Skokomish River
Primary Purpose: Hydroelectric
Type: Arch Concrete Earth
Commissioned: 1926
Dam Height: 235 ft (72 m)
Dam Length: 1,111 ft (339 m)
Dam Capacity: 482,757 acre-ft (595,471 Ml)
Share Cushman No 1 Dam:

Cushman No 1 Dam Map

Cushman No 1 Dam Information

Cushman No 1 Dam is an arch concrete earth dam located about 15 miles from Skokomish Indian Res, Mason, Washington.

The dam, which is on the North Fork Skokomish River, was primarily built for Hydroelectric purposes, but also serves for Recreation benefits.

The dam was designed by and commissioned in 1926 and is currently owned by City of Tacoma.

Cushman No 1 Dam Structure

The Cushman No 1 Dam is approximately 1,111 feet (339 m) long, 235 feet (72 m) high and has a structural volume of 90,000 cubic yards (68,810 cubic metres).

Cushman No 1 Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 453,350 acre-ft (559,198 Ml) and maximum capacity of 482,757 acre-ft (595,471 Ml).

The surface area of the reservoir is 4,010 acres (1,623 ha) and the total catchment area is 95 square miles (246 square kilometres).

Cushman No 1 Dam Spillway

According to the latest available data, the Cushman No 1 Dam does not have any spillways.

Cushman No 1 Dam Compared to Five Famous American Dams

Height (ft)
Length (Ft)
Storage Volume (acre-ft)
Drainage Area (sq miles)
 
Cushman No 1 Dam
Mason, Washington
Height (ft)
235
Length (Ft)
1,111
Storage Volume (acre-ft)
482,757
Drainage Area (sq miles)
95
Hoover Dam
Clark County, Nevada
Height (ft)
730
Length (Ft)
1,244
Storage Volume (acre-ft)
30,237,000
Drainage Area (sq miles)
167,800
Grand Coulee Dam
Okanogan County, Washington
Height (ft)
550
Length (Ft)
5,673
Storage Volume (acre-ft)
9,562,0000
Drainage Area (sq miles)
74,100
Theodore Roosevelt Dam
Maricopa County, Arizona
Height (ft)
357
Length (Ft)
1,208
Storage Volume (acre-ft)
3,411,500
Drainage Area (sq miles)
5,736
Oroville Dam
Butte County, California
Height (ft)
235
Length (Ft)
6,920
Storage Volume (acre-ft)
3,540,000
Drainage Area (sq miles)
3,611
Glen Canyon Dam
Coconino County, Arizona
Height (ft)
216
Length (Ft)
1,565
Storage Volume (acre-ft)
29,875,000
Drainage Area (sq miles)
108,355

Cushman No 1 Dam Weather

Current Conditions at Cushman No 1 Dam

Failed to fetch current weather data.

7-Day Forecast for Cushman No 1 Dam

Failed to fetch weather forecast data.

Cushman No 1 Dam Frequently Asked Questions

In which state is the Cushman No 1 Dam?

Cushman No 1 Dam is in Washington.

In which county is the Cushman No 1 Dam?

Cushman No 1 Dam is in Mason County.

How high is the Cushman No 1 Dam?

Cushman No 1 Dam is 235 feet high.

How long is the Cushman No 1 Dam?

Cushman No 1 Dam is 1,111 feet long.

Share Cushman No 1 Dam:

More Dams in Mason County:

Chain Lake Water Control Dam
Cushman No 1 Dam
Cushman No 2 Dam
Hamlin Lake Dam
Lake Chautauqua Upper Dam
Ludington Dam

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG