Cushman No 2 Dam, Washington, USA

Home / USA / Washington / Cushman No 2 Dam

Quick Facts About Cushman No 2 Dam

Location: Mason, Washington
Coordinates: 47.397676, -123.201031
River: North Fork Skokomish River (Ho
Primary Purpose: Hydroelectric
Type: Arch Gravity
Commissioned: 1930
Dam Height: 175 ft (53 m)
Dam Length: 460 ft (140 m)
Dam Capacity: 8,800 acre-ft (10,855 Ml)
Condition Assessment: Satisfactory

Cushman No 2 Dam Map

Here is a map of Cushman No 2 Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Cushman No 2 Dam Information

Cushman No 2 Dam is an arch gravity dam located about 14 miles from Skokomish Indian Res, Mason, Washington.

The dam, which is on the North Fork Skokomish River (Ho, was primarily built for Hydroelectric purposes, but also serves for Recreation benefits.

The dam was designed by and commissioned in 1930 and is currently owned by City of Tacoma.

Cushman No 2 Dam Structure

The Cushman No 2 Dam is approximately 460 feet (140 m) long, 175 feet (53 m) high and has a structural volume of 38,000 cubic yards (29,053 cubic metres).

Cushman No 2 Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 8,000 acre-ft (9,868 Ml) and maximum capacity of 8,800 acre-ft (10,855 Ml).

The surface area of the reservoir is 150 acres (61 ha) and the total catchment area is 103 square miles (267 square kilometres).

Cushman No 2 Dam Spillway

The dam has a 120 feet (37 m) wide controlled spillway with a maximum discharge capacity of 41050 cubic feet per second (1162 cubic metres per second).

Cushman No 2 Dam Compared to Four Famous American Dams

Cushman No 2 Dam
Mason, Washington
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 175 730 550 357 216
Length (Ft) 460 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 8,800 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 103 167,800 74,100 3,611 108,355

Cushman No 2 Dam Weather

Current Conditions at Cushman No 2 Dam

Failed to fetch current weather data.

7-Day Forecast for Cushman No 2 Dam

Failed to fetch weather forecast data.

Cushman No 2 Dam Frequently Asked Questions

In which state is the Cushman No 2 Dam?

Cushman No 2 Dam is in Washington.

In which county is the Cushman No 2 Dam?

Cushman No 2 Dam is in Mason County.

How high is the Cushman No 2 Dam?

Cushman No 2 Dam is 175 feet high.

How long is the Cushman No 2 Dam?

Cushman No 2 Dam is 460 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG