La Grande Dam, Washington, USA

Home / USA / Washington / La Grande Dam

Quick Facts About La Grande Dam

Location: Thurston, Washington
Coordinates: 46.822825, -122.304277
River: Nisqually River
Primary Purpose: Hydroelectric
Type: Concrete Arch Gravity
Commissioned: 1944
Dam Height: 192 ft (59 m)
Dam Length: 710 ft (216 m)
Dam Capacity: 7,200 acre-ft (8,881 Ml)
Condition Assessment: Satisfactory

La Grande Dam Map

Here is a map of La Grande Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

La Grande Dam Information

La Grande Dam is a concrete arch gravity dam located about 16 miles from Yelm, Wa, Thurston, Washington.

The dam, which is on the Nisqually River, was primarily built for Hydroelectric purposes, but also serves for benefits.

The dam was designed by and commissioned in 1944 and is currently owned by City of Tacoma.

La Grande Dam Structure

The La Grande Dam is approximately 710 feet (216 m) long, 192 feet (59 m) high and has a structural volume of 85,000 cubic yards (64,987 cubic metres).

La Grande Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 2,700 acre-ft (3,330 Ml) and maximum capacity of 7,200 acre-ft (8,881 Ml).

The surface area of the reservoir is 450 acres (182 ha) and the total catchment area is 292 square miles (756 square kilometres).

La Grande Dam Spillway

The dam spillway has a maximum discharge capacity of 88000 cubic feet per second (2492 cubic metres per second).

La Grande Dam Compared to Four Famous American Dams

La Grande Dam
Thurston, Washington
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 192 730 550 357 216
Length (Ft) 710 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 7,200 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 292 167,800 74,100 3,611 108,355

La Grande Dam Weather

Current Conditions at La Grande Dam

Failed to fetch current weather data.

7-Day Forecast for La Grande Dam

Failed to fetch weather forecast data.

La Grande Dam Frequently Asked Questions

In which state is the La Grande Dam?

La Grande Dam is in Washington.

In which county is the La Grande Dam?

La Grande Dam is in Thurston County.

How high is the La Grande Dam?

La Grande Dam is 192 feet high.

How long is the La Grande Dam?

La Grande Dam is 710 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG