Masonry Dam, Washington, USA

Home / USA / Washington / Masonry Dam

Quick Facts About Masonry Dam

Location: Pierce, Washington
Coordinates: 47.012214, -121.752584
River: Cedar River
Primary Purpose: Hydroelectric
Type: Arch
Commissioned: 1914
Dam Height: 230 ft (70 m)
Dam Length: 980 ft (299 m)
Dam Capacity: 175,000 acre-ft (215,859 Ml)
Condition Assessment: Satisfactory

Masonry Dam Map

Here is a map of Masonry Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Masonry Dam Information

Masonry Dam is an arch dam located about 2 miles from Cedar Falls, Pierce, Washington.

The dam, which is on the Cedar River, was primarily built for Hydroelectric purposes, but also serves for Water Supply benefits.

The dam was designed by and commissioned in 1914 and is currently owned by Seattle City Light.

Masonry Dam Structure

The Masonry Dam is approximately 980 feet (299 m) long, 230 feet (70 m) high and has a structural volume of cubic yards (0 cubic metres).

Masonry Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 90,660 acre-ft (111,827 Ml) and maximum capacity of 175,000 acre-ft (215,859 Ml).

The surface area of the reservoir is acres (0 ha) and the total catchment area is 81 square miles (211 square kilometres).

Masonry Dam Spillway

The dam spillway has a maximum discharge capacity of 74400 cubic feet per second (2107 cubic metres per second).

Masonry Dam Compared to Four Famous American Dams

Masonry Dam
Pierce, Washington
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 230 730 550 357 216
Length (Ft) 980 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 175,000 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 81 167,800 74,100 3,611 108,355

Masonry Dam Weather

Current Conditions at Masonry Dam

Failed to fetch current weather data.

7-Day Forecast for Masonry Dam

Failed to fetch weather forecast data.

Masonry Dam Frequently Asked Questions

In which state is the Masonry Dam?

Masonry Dam is in Washington.

In which county is the Masonry Dam?

Masonry Dam is in Pierce County.

How high is the Masonry Dam?

Masonry Dam is 230 feet high.

How long is the Masonry Dam?

Masonry Dam is 980 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG