Mayfield Dam, Washington, USA

Home / USA / Washington / Mayfield Dam

Quick Facts About Mayfield Dam

Location: Lewis, Washington
Coordinates: 46.5033, -122.5883
River: Cowlitz River
Primary Purpose: Hydroelectric
Type: Arch Gravity
Commissioned: 1963
Dam Height: 200 ft (61 m)
Dam Length: 850 ft (259 m)
Dam Capacity: 184,194 acre-ft (227,200 Ml)
Condition Assessment: Unsatisfactory

Mayfield Dam Map

Here is a map of Mayfield Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Mayfield Dam Information

Mayfield Dam is an arch gravity dam located about 15 miles from Toledo, Wa, Lewis, Washington.

The dam, which is on the Cowlitz River, was primarily built for Hydroelectric purposes, but also serves for Recreation benefits.

The dam was designed by Harza Engineering Co. and commissioned in 1963 and is currently owned by City of Tacoma.

Mayfield Dam Structure

The Mayfield Dam is approximately 850 feet (259 m) long, 200 feet (61 m) high and has a structural volume of 110,000 cubic yards (84,101 cubic metres).

Mayfield Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 133,718 acre-ft (164,938 Ml) and maximum capacity of 184,194 acre-ft (227,200 Ml).

The surface area of the reservoir is 2,250 acres (911 ha) and the total catchment area is 1,392 square miles (3,605 square kilometres).

Mayfield Dam Spillway

The dam has a 205 feet (62 m) wide controlled spillway with a maximum discharge capacity of 313000 cubic feet per second (8863 cubic metres per second).

Mayfield Dam Compared to Four Famous American Dams

Mayfield Dam
Lewis, Washington
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 200 730 550 357 216
Length (Ft) 850 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 184,194 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 1,392 167,800 74,100 3,611 108,355

Mayfield Dam Weather

Current Conditions at Mayfield Dam

Failed to fetch current weather data.

7-Day Forecast for Mayfield Dam

Failed to fetch weather forecast data.

Mayfield Dam Frequently Asked Questions

In which state is the Mayfield Dam?

Mayfield Dam is in Washington.

In which county is the Mayfield Dam?

Mayfield Dam is in Lewis County.

How high is the Mayfield Dam?

Mayfield Dam is 200 feet high.

How long is the Mayfield Dam?

Mayfield Dam is 850 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG