Packwood Lake Dam, Washington, USA

Home / USA / Washington / Packwood Lake Dam

Quick Facts About Packwood Lake Dam

Location: Lewis, Washington
Coordinates: 46.5954, -121.5678
River: Lake Creek, Cowlitz River
Primary Purpose: Hydroelectric
Type: Gravity
Commissioned: 1964
Dam Height: 14 ft (4 m)
Dam Length: 85 ft (26 m)
Dam Capacity: 6,300 acre-ft (7,771 Ml)
Condition Assessment: Satisfactory

Packwood Lake Dam Map

Here is a map of Packwood Lake Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Packwood Lake Dam Information

Packwood Lake Dam is a gravity dam located about 8 miles from Packwood, Lewis, Washington.

The dam, which is on the Lake Creek, Cowlitz River, was primarily built for Hydroelectric purposes, but also serves for Recreation benefits.

The dam was designed by and commissioned in 1964 and is currently owned by Energy Northwest.

Packwood Lake Dam Structure

The Packwood Lake Dam is approximately 85 feet (26 m) long, 14 feet (4 m) high and has a structural volume of 0 cubic yards (0 cubic metres).

Packwood Lake Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 3,500 acre-ft (4,317 Ml) and maximum capacity of 6,300 acre-ft (7,771 Ml).

The surface area of the reservoir is 453 acres (183 ha) and the total catchment area is 20 square miles (52 square kilometres).

Packwood Lake Dam Spillway

The dam has a 85 feet (26 m) wide uncontrolled spillway with a maximum discharge capacity of 7800 cubic feet per second (221 cubic metres per second).

Packwood Lake Dam Compared to Four Famous American Dams

Packwood Lake Dam
Lewis, Washington
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 14 730 550 357 216
Length (Ft) 85 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 6,300 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 20 167,800 74,100 3,611 108,355

Packwood Lake Dam Weather

Current Conditions at Packwood Lake Dam

Failed to fetch current weather data.

7-Day Forecast for Packwood Lake Dam

Failed to fetch weather forecast data.

Packwood Lake Dam Frequently Asked Questions

In which state is the Packwood Lake Dam?

Packwood Lake Dam is in Washington.

In which county is the Packwood Lake Dam?

Packwood Lake Dam is in Lewis County.

How high is the Packwood Lake Dam?

Packwood Lake Dam is 14 feet high.

How long is the Packwood Lake Dam?

Packwood Lake Dam is 85 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG