Rock Island Dam, Washington, USA

Home / USA / Washington / Rock Island Dam

Quick Facts About Rock Island Dam

Location: Douglas, Washington
Coordinates: 47.342359, -120.094324
River: Columbia River
Primary Purpose: Hydroelectric
Type: Gravity
Commissioned: 1932
Dam Height: 71 ft (22 m)
Dam Length: 3,108 ft (947 m)
Dam Capacity: 131,000 acre-ft (161,586 Ml)
Condition Assessment: Satisfactory

Rock Island Dam Map

Here is a map of Rock Island Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Rock Island Dam Information

Rock Island Dam is a gravity dam located about 32 miles from Vantage, Wa, Douglas, Washington.

The dam, which is on the Columbia River, was primarily built for Hydroelectric purposes, but also serves for Flood Risk Reduction benefits.

The dam was designed by Stone & Webster Engineering Corporation and commissioned in 1932 and is currently owned by PUD #1 of Chelan County, WA.

Rock Island Dam Structure

The Rock Island Dam is approximately 3,108 feet (947 m) long, 71 feet (22 m) high and has a structural volume of 0 cubic yards (0 cubic metres).

Rock Island Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 113,700 acre-ft (140,247 Ml) and maximum capacity of 131,000 acre-ft (161,586 Ml).

The surface area of the reservoir is 3,120 acres (1,263 ha) and the total catchment area is 89,400 square miles (231,545 square kilometres).

Rock Island Dam Spillway

The dam spillway has a maximum discharge capacity of 920000 cubic feet per second (26051 cubic metres per second).

Rock Island Dam Compared to Four Famous American Dams

Rock Island Dam
Douglas, Washington
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 71 730 550 357 216
Length (Ft) 3,108 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 131,000 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 89,400 167,800 74,100 3,611 108,355

Rock Island Dam Weather

Current Conditions at Rock Island Dam

Failed to fetch current weather data.

7-Day Forecast for Rock Island Dam

Failed to fetch weather forecast data.

Rock Island Dam Frequently Asked Questions

In which state is the Rock Island Dam?

Rock Island Dam is in Washington.

In which county is the Rock Island Dam?

Rock Island Dam is in Douglas County.

How high is the Rock Island Dam?

Rock Island Dam is 71 feet high.

How long is the Rock Island Dam?

Rock Island Dam is 3,108 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG