Ross Dam, Washington, USA

Home / USA / Washington / Ross Dam

Quick Facts About Ross Dam

Location: Whatcom, Washington
Coordinates: 48.7322, -121.0677
River: Skagit River
Primary Purpose: Hydroelectric
Type: Concrete Arch
Commissioned: 1949
Dam Height: 540 ft (165 m)
Dam Length: 1,300 ft (396 m)
Dam Capacity: 1,452,750 acre-ft (1,791,938 Ml)
Condition Assessment: Satisfactory

Ross Dam Map

Here is a map of Ross Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Ross Dam Information

Ross Dam is a concrete arch dam located about 4 miles from Diablo, Whatcom, Washington.

The dam, which is on the Skagit River, was primarily built for Hydroelectric purposes, but also serves for Fish and Wildlife Pond, Recreation and Flood Risk Reduction benefits.

The dam was designed by U.S. Bureau of Reclamation/Dr. J.L. Savage and commissioned in 1949 and is currently owned by City of Seattle.

Ross Dam Structure

The Ross Dam is approximately 1,300 feet (396 m) long, 540 feet (165 m) high and has a structural volume of 0 cubic yards (0 cubic metres).

Ross Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 1,435,000 acre-ft (1,770,044 Ml) and maximum capacity of 1,452,750 acre-ft (1,791,938 Ml).

The surface area of the reservoir is 11,680 acres (4,727 ha) and the total catchment area is 978 square miles (2,533 square kilometres).

Ross Dam Spillway

The dam spillway has a maximum discharge capacity of 85000 cubic feet per second (2407 cubic metres per second).

Ross Dam Compared to Four Famous American Dams

Ross Dam
Whatcom, Washington
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 540 730 550 357 216
Length (Ft) 1,300 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 1,452,750 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 978 167,800 74,100 3,611 108,355

Ross Dam Weather

Current Conditions at Ross Dam

Failed to fetch current weather data.

7-Day Forecast for Ross Dam

Failed to fetch weather forecast data.

Ross Dam Frequently Asked Questions

In which state is the Ross Dam?

Ross Dam is in Washington.

In which county is the Ross Dam?

Ross Dam is in Whatcom County.

How high is the Ross Dam?

Ross Dam is 540 feet high.

How long is the Ross Dam?

Ross Dam is 1,300 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG