Lake Stephens Dam, West Virginia, USA

Home / USA / West Virginia / Lake Stephens Dam

Quick Facts About Lake Stephens Dam

Location: Raleigh, West Virginia
Coordinates: 37.77694, -81.3088889
River: Stephens Branch River
Primary Purpose: Recreation
Type: Rockfill Earth
Commissioned: 1963
Dam Height: 74 ft (23 m)
Dam Length: 875 ft (267 m)
Dam Capacity: 8,990 acre-ft (11,089 Ml)

Lake Stephens Dam Map

Here is a map of Lake Stephens Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Lake Stephens Dam Information

Lake Stephens Dam is a rockfill earth dam located about 1 miles from Surveyor, Raleigh, West Virginia.

The dam, which is on the Stephens Branch River, was primarily built for Recreation purposes, but also serves for benefits.

The dam was designed by and commissioned in 1963 and is currently owned by RALEIGH COUNTY RECREATION AUTHORITY.

Lake Stephens Dam Structure

The Lake Stephens Dam is approximately 875 feet (267 m) long, 74 feet (23 m) high and has a structural volume of 0 cubic yards (0 cubic metres).

Lake Stephens Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 6,566 acre-ft (8,099 Ml) and maximum capacity of 8,990 acre-ft (11,089 Ml).

The surface area of the reservoir is 248 acres (100 ha) and the total catchment area is 4 square miles (10 square kilometres).

Lake Stephens Dam Spillway

According to the latest available data, the Lake Stephens Dam does not have any spillways.

Lake Stephens Dam Compared to Four Famous American Dams

Lake Stephens Dam
Raleigh, West Virginia
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 74 730 550 357 216
Length (Ft) 875 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 8,990 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 4 167,800 74,100 3,611 108,355

Lake Stephens Dam Weather

Current Conditions at Lake Stephens Dam

Failed to fetch current weather data.

7-Day Forecast for Lake Stephens Dam

Failed to fetch weather forecast data.

Lake Stephens Dam Frequently Asked Questions

In which state is the Lake Stephens Dam?

Lake Stephens Dam is in West Virginia.

In which county is the Lake Stephens Dam?

Lake Stephens Dam is in Raleigh County.

How high is the Lake Stephens Dam?

Lake Stephens Dam is 74 feet high.

How long is the Lake Stephens Dam?

Lake Stephens Dam is 875 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG