Mill Creek #10 Dam, West Virginia, USA

Home / USA / West Virginia / Mill Creek #10 Dam

Quick Facts About Mill Creek #10 Dam

Location: Jackson, West Virginia
Coordinates: 38.80278, -81.6313889
River: Mill Creek Of Elk Fork River
Primary Purpose: Flood Risk Reduction
Type: Rockfill Earth
Commissioned: 1997
Dam Height: 69 ft (21 m)
Dam Length: 1,049 ft (320 m)
Dam Capacity: 25,545 acre-ft (31,509 Ml)
Condition Assessment: Satisfactory

Mill Creek #10 Dam Map

Here is a map of Mill Creek #10 Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Mill Creek #10 Dam Information

Mill Creek #10 Dam is a rockfill earth dam located in Ripley, Jackson, West Virginia.

The dam, which is on the Mill Creek Of Elk Fork River, was primarily built for Flood Risk Reduction purposes, but also serves for benefits.

The dam was designed by USDA NRCS and commissioned in 1997 and is currently owned by SISSONVILLE PSD.

Mill Creek #10 Dam Structure

The Mill Creek #10 Dam is approximately 1,049 feet (320 m) long, 69 feet (21 m) high and has a structural volume of 0 cubic yards (0 cubic metres).

Mill Creek #10 Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 2,792 acre-ft (3,444 Ml) and maximum capacity of 25,545 acre-ft (31,509 Ml).

The surface area of the reservoir is 278 acres (113 ha) and the total catchment area is square miles (0 square kilometres).

Mill Creek #10 Dam Spillway

The dam spillway has a maximum discharge capacity of 49161 cubic feet per second (1392 cubic metres per second).

Mill Creek #10 Dam Compared to Four Famous American Dams

Mill Creek #10 Dam
Jackson, West Virginia
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 69 730 550 357 216
Length (Ft) 1,049 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 25,545 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 167,800 74,100 3,611 108,355

Mill Creek #10 Dam Weather

Current Conditions at Mill Creek #10 Dam

Failed to fetch current weather data.

7-Day Forecast for Mill Creek #10 Dam

Failed to fetch weather forecast data.

Mill Creek #10 Dam Frequently Asked Questions

In which state is the Mill Creek #10 Dam?

Mill Creek #10 Dam is in West Virginia.

In which county is the Mill Creek #10 Dam?

Mill Creek #10 Dam is in Jackson County.

How high is the Mill Creek #10 Dam?

Mill Creek #10 Dam is 69 feet high.

How long is the Mill Creek #10 Dam?

Mill Creek #10 Dam is 1,049 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG