Mt. Storm Lake Dam, West Virginia, USA

Home / USA / West Virginia / Mt. Storm Lake Dam

Quick Facts About Mt. Storm Lake Dam

Location: Grant, West Virginia
Coordinates: 39.20778, -79.2625
River: Stony River
Primary Purpose: Other
Type: Rockfill Earth
Commissioned: 1964
Dam Height: 153 ft (47 m)
Dam Length: 1,793 ft (547 m)
Dam Capacity: 54,000 acre-ft (66,608 Ml)
Condition Assessment: Satisfactory

Mt. Storm Lake Dam Map

Here is a map of Mt. Storm Lake Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Mt. Storm Lake Dam Information

Mt. Storm Lake Dam is a rockfill earth dam located about 22 miles from Kitzmiller, Md, Grant, West Virginia.

The dam, which is on the Stony River, was primarily built for Other purposes, but also serves for benefits.

The dam was designed by and commissioned in 1964 and is currently owned by VIRGINIA ELECTRIC & POWER COMPANY.

Mt. Storm Lake Dam Structure

The Mt. Storm Lake Dam is approximately 1,793 feet (547 m) long, 153 feet (47 m) high and has a structural volume of 0 cubic yards (0 cubic metres).

Mt. Storm Lake Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 44,000 acre-ft (54,273 Ml) and maximum capacity of 54,000 acre-ft (66,608 Ml).

The surface area of the reservoir is 1,100 acres (445 ha) and the total catchment area is 31 square miles (81 square kilometres).

Mt. Storm Lake Dam Spillway

According to the latest available data, the Mt. Storm Lake Dam does not have any spillways.

Mt. Storm Lake Dam Compared to Four Famous American Dams

Mt. Storm Lake Dam
Grant, West Virginia
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 153 730 550 357 216
Length (Ft) 1,793 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 54,000 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 31 167,800 74,100 3,611 108,355

Mt. Storm Lake Dam Weather

Current Conditions at Mt. Storm Lake Dam

Failed to fetch current weather data.

7-Day Forecast for Mt. Storm Lake Dam

Failed to fetch weather forecast data.

Mt. Storm Lake Dam Frequently Asked Questions

In which state is the Mt. Storm Lake Dam?

Mt. Storm Lake Dam is in West Virginia.

In which county is the Mt. Storm Lake Dam?

Mt. Storm Lake Dam is in Grant County.

How high is the Mt. Storm Lake Dam?

Mt. Storm Lake Dam is 153 feet high.

How long is the Mt. Storm Lake Dam?

Mt. Storm Lake Dam is 1,793 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG