Tinsley Branch Refuse Impoundment Dam, West Virginia, USA

Home / USA / West Virginia / Tinsley Branch Refuse Impoundment Dam

Quick Facts About Tinsley Branch Refuse Impoundment Dam

Location: Logan, West Virginia
Coordinates: 37.8206, -81.9044444
River: Tinsely Branch River
Primary Purpose: Tailings
Type: Earth
Commissioned: 2005
Dam Height: 405 ft (123 m)
Dam Length: 2,630 ft (802 m)
Dam Capacity: 9,905 acre-ft (12,218 Ml)
Hazard Potential: Undetermined

Tinsley Branch Refuse Impoundment Dam Map

Here is a map of Tinsley Branch Refuse Impoundment Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Tinsley Branch Refuse Impoundment Dam Information

Tinsley Branch Refuse Impoundment Dam is an earthen embankment dam located about 1.2 miles from Dehue, Logan, West Virginia.

The dam, which is on the Tinsely Branch River, was primarily built for Tailings purposes, but also serves for benefits.

The dam was designed by and commissioned in 2005 and is currently owned by BANDMILL COAL CORPORATION.

Tinsley Branch Refuse Impoundment Dam Structure

The Tinsley Branch Refuse Impoundment Dam is approximately 2,630 feet (802 m) long, 405 feet (123 m) high and has a structural volume of 0 cubic yards (0 cubic metres).

Tinsley Branch Refuse Impoundment Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 8,921 acre-ft (11,004 Ml) and maximum capacity of 9,905 acre-ft (12,218 Ml).

The surface area of the reservoir is 82 acres (33 ha) and the total catchment area is 1 square miles (1 square kilometres).

Tinsley Branch Refuse Impoundment Dam Spillway

The dam spillway has a maximum discharge capacity of 64.2 cubic feet per second (2 cubic metres per second).

Tinsley Branch Refuse Impoundment Dam Compared to Four Famous American Dams

Tinsley Branch Refuse Impoundment Dam
Logan, West Virginia
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 405 730 550 357 216
Length (Ft) 2,630 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 9,905 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 1 167,800 74,100 3,611 108,355

Tinsley Branch Refuse Impoundment Dam Weather

Current Conditions at Tinsley Branch Refuse Impoundment Dam

Failed to fetch current weather data.

7-Day Forecast for Tinsley Branch Refuse Impoundment Dam

Failed to fetch weather forecast data.

Tinsley Branch Refuse Impoundment Dam Frequently Asked Questions

In which state is the Tinsley Branch Refuse Impoundment Dam?

Tinsley Branch Refuse Impoundment Dam is in West Virginia.

In which county is the Tinsley Branch Refuse Impoundment Dam?

Tinsley Branch Refuse Impoundment Dam is in Logan County.

How high is the Tinsley Branch Refuse Impoundment Dam?

Tinsley Branch Refuse Impoundment Dam is 405 feet high.

How long is the Tinsley Branch Refuse Impoundment Dam?

Tinsley Branch Refuse Impoundment Dam is 2,630 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG