Beaver Dam Lake, Wisconsin, USA

Home / USA / Wisconsin / Beaver Dam Lake

Quick Facts About Beaver Dam Lake

Location: Barron, Wisconsin
Coordinates: 45.524771, -92.0161399
River: Hay River
Primary Purpose: Recreation
Type: Earth
Commissioned: 1942
Dam Height: 6 ft (2 m)
Dam Length: 400 ft (122 m)
Dam Capacity: 12,000 acre-ft (14,802 Ml)

Beaver Dam Lake Map

Here is a map of Beaver Dam Lake with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Beaver Dam Lake Information

Beaver Dam Lake is an earthen embankment dam located in Cumberland, Barron, Wisconsin.

The dam, which is on the Hay River, was primarily built for Recreation purposes, but also serves for benefits.

The dam was designed by and commissioned in 1942 and is currently owned by Barron County.

Beaver Dam Lake Structure

The Beaver Dam Lake is approximately 400 feet (122 m) long, 6 feet (2 m) high and has a structural volume of cubic yards (0 cubic metres).

Beaver Dam Lake Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 1,000 acre-ft (1,233 Ml) and maximum capacity of 12,000 acre-ft (14,802 Ml).

The surface area of the reservoir is 1,163 acres (471 ha) and the total catchment area is 20 square miles (52 square kilometres).

Beaver Dam Lake Spillway

The dam has a 7 feet (2 m) wide controlled spillway with a maximum discharge capacity of 441 cubic feet per second (12 cubic metres per second).

Beaver Dam Lake Compared to Four Famous American Dams

Beaver Dam Lake
Barron, Wisconsin
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 6 730 550 357 216
Length (Ft) 400 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 12,000 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 20 167,800 74,100 3,611 108,355

Beaver Dam Lake Weather

Current Conditions at Beaver Dam Lake

Failed to fetch current weather data.

7-Day Forecast for Beaver Dam Lake

Failed to fetch weather forecast data.

Beaver Dam Lake Frequently Asked Questions

In which state is the Beaver Dam Lake?

Beaver Dam Lake is in Wisconsin.

In which county is the Beaver Dam Lake?

Beaver Dam Lake is in Barron County.

How high is the Beaver Dam Lake?

Beaver Dam Lake is 6 feet high.

How long is the Beaver Dam Lake?

Beaver Dam Lake is 400 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG