Blackhawk Lake Dam, Wisconsin, USA

Home / USA / Wisconsin / Blackhawk Lake Dam

Quick Facts About Blackhawk Lake Dam

Location: Iowa, Wisconsin
Coordinates: 43.02637, -90.2796
River: Otter Creek & Cave Hollow Br River
Primary Purpose: Recreation
Type: Earth
Commissioned: 1969
Dam Height: 50 ft (15 m)
Dam Length: 1,130 ft (344 m)
Dam Capacity: 7,900 acre-ft (9,744 Ml)

Blackhawk Lake Dam Map

Here is a map of Blackhawk Lake Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Blackhawk Lake Dam Information

Blackhawk Lake Dam is an earthen embankment dam located in None, Iowa, Wisconsin.

The dam, which is on the Otter Creek & Cave Hollow Br River, was primarily built for Recreation purposes, but also serves for benefits.

The dam was designed by USDA NRCS and commissioned in 1969 and is currently owned by Iowa County.

Blackhawk Lake Dam Structure

The Blackhawk Lake Dam is approximately 1,130 feet (344 m) long, 50 feet (15 m) high and has a structural volume of cubic yards (0 cubic metres).

Blackhawk Lake Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 3,810 acre-ft (4,700 Ml) and maximum capacity of 7,900 acre-ft (9,744 Ml).

The surface area of the reservoir is 220 acres (89 ha) and the total catchment area is 16 square miles (42 square kilometres).

Blackhawk Lake Dam Spillway

The dam spillway has a maximum discharge capacity of 460 cubic feet per second (13 cubic metres per second).

Blackhawk Lake Dam Compared to Four Famous American Dams

Blackhawk Lake Dam
Iowa, Wisconsin
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 50 730 550 357 216
Length (Ft) 1,130 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 7,900 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 16 167,800 74,100 3,611 108,355

Blackhawk Lake Dam Weather

Current Conditions at Blackhawk Lake Dam

Failed to fetch current weather data.

7-Day Forecast for Blackhawk Lake Dam

Failed to fetch weather forecast data.

Blackhawk Lake Dam Frequently Asked Questions

In which state is the Blackhawk Lake Dam?

Blackhawk Lake Dam is in Wisconsin.

In which county is the Blackhawk Lake Dam?

Blackhawk Lake Dam is in Iowa County.

How high is the Blackhawk Lake Dam?

Blackhawk Lake Dam is 50 feet high.

How long is the Blackhawk Lake Dam?

Blackhawk Lake Dam is 1,130 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG