Gile Dam, Wisconsin, USA

Home / USA / Wisconsin / Gile Dam

Quick Facts About Gile Dam

Location: Iron, Wisconsin
Coordinates: 46.425424, -90.226588
River: West Fork, Montreal Rive River
Primary Purpose: Other
Type: Earth Concrete
Commissioned: 1941
Dam Height: 30 ft (9 m)
Dam Length: 899 ft (274 m)
Dam Capacity: 38,000 acre-ft (46,872 Ml)
Condition Assessment: Satisfactory

Gile Dam Map

Here is a map of Gile Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Gile Dam Information

Gile Dam is an earth concrete dam located in Iron County, Wisconsin.

The dam, which is on the West Fork, Montreal Rive River, was primarily built for Other purposes, but also serves for benefits.

The dam was designed by and commissioned in 1941 and is currently owned by .

Gile Dam Structure

The Gile Dam is approximately 899 feet (274 m) long, 30 feet (9 m) high and has a structural volume of cubic yards (0 cubic metres).

Gile Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 37,064 acre-ft (45,718 Ml) and maximum capacity of 38,000 acre-ft (46,872 Ml).

The surface area of the reservoir is 3,317 acres (1,342 ha) and the total catchment area is square miles (0 square kilometres).

Gile Dam Spillway

The dam has a 16 feet (5 m) wide controlled spillway with a maximum discharge capacity of cubic feet per second (0 cubic metres per second).

Gile Dam Compared to Four Famous American Dams

Gile Dam
Iron, Wisconsin
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 30 730 550 357 216
Length (Ft) 899 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 38,000 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 167,800 74,100 3,611 108,355

Gile Dam Weather

Current Conditions at Gile Dam

Parameter Value
Current Time 20:11
Sunrise 06:18
Sunset 19:44
Temperature (°F) 69
Feels Like (°F) 69
Cloud Coverage (%) 34
Pressure (inHg) 1013
Humidity (%) 83
Wind Speed (mph) 5
Rain (mm) 0

7-Day Forecast for Gile Dam

Day Min Temp (°F) Max Temp (°F) Feels Like (°F) Pressure (inHg) Humidity (%) Wind Speed (mph) Wind Gust (mph) Wind Dir Precip Prob (%) Precip Volume (mm) Weather
Today 61 72 71 1013 83 8 26 SE 100 1 light rain
Mon 66 87 85 1009 52 12 30 SSE 100 5 moderate rain
Tue 64 85 87 1010 48 9 22 WNW 20 0 light rain
Wed 61 81 78 1013 36 8 14 NNW 44 0 light rain
Thu 58 87 86 1011 38 8 21 SSW 100 3 light rain
Fri 65 86 88 1012 55 7 17 SE 100 9 moderate rain
Sat 66 88 89 1014 50 8 18 SSE 100 1 light rain
Sun 64 78 71 1017 92 11 28 SSE 100 3 light rain

Gile Dam Frequently Asked Questions

In which state is the Gile Dam?

Gile Dam is in Wisconsin.

In which county is the Gile Dam?

Gile Dam is in Iron County.

How high is the Gile Dam?

Gile Dam is 30 feet high.

How long is the Gile Dam?

Gile Dam is 899 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG