Jim Falls Dam, Wisconsin, USA

Home / USA / Wisconsin / Jim Falls Dam

Quick Facts About Jim Falls Dam

Location: Chippewa, Wisconsin
Coordinates: 45.0605, -91.266
River: Chippewa River
Primary Purpose: Hydroelectric
Type: Gravity Earth
Commissioned: 1923
Dam Height: 55 ft (17 m)
Dam Length: 2,589 ft (789 m)
Dam Capacity: 11,400 acre-ft (14,062 Ml)
Condition Assessment: Satisfactory

Jim Falls Dam Map

Here is a map of Jim Falls Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Jim Falls Dam Information

Jim Falls Dam is a gravity earth dam located in Jim Falls, Chippewa, Wisconsin.

The dam, which is on the Chippewa River, was primarily built for Hydroelectric purposes, but also serves for Recreation benefits.

The dam was designed by and commissioned in 1923 and is currently owned by Northern States Power Co.

Jim Falls Dam Structure

The Jim Falls Dam is approximately 2,589 feet (789 m) long, 55 feet (17 m) high and has a structural volume of cubic yards (0 cubic metres).

Jim Falls Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 11,400 acre-ft (14,062 Ml) and maximum capacity of 11,400 acre-ft (14,062 Ml).

The surface area of the reservoir is 996 acres (403 ha) and the total catchment area is 4,891 square miles (12,668 square kilometres).

Jim Falls Dam Spillway

The dam has a 265.5 feet (81 m) wide controlled spillway with a maximum discharge capacity of 330000 cubic feet per second (9345 cubic metres per second).

Jim Falls Dam Compared to Four Famous American Dams

Jim Falls Dam
Chippewa, Wisconsin
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 55 730 550 357 216
Length (Ft) 2,589 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 11,400 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 4,891 167,800 74,100 3,611 108,355

Jim Falls Dam Weather

Current Conditions at Jim Falls Dam

Failed to fetch current weather data.

7-Day Forecast for Jim Falls Dam

Failed to fetch weather forecast data.

Jim Falls Dam Frequently Asked Questions

In which state is the Jim Falls Dam?

Jim Falls Dam is in Wisconsin.

In which county is the Jim Falls Dam?

Jim Falls Dam is in Chippewa County.

How high is the Jim Falls Dam?

Jim Falls Dam is 55 feet high.

How long is the Jim Falls Dam?

Jim Falls Dam is 2,589 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG