Mendota Locks Dam, Wisconsin, USA

Home / USA / Wisconsin / Mendota Locks Dam

Quick Facts About Mendota Locks Dam

Location: Dane, Wisconsin
Coordinates: 43.09489, -89.37025
River: Yahara River
Primary Purpose: Navigation
Type: Other
Commissioned: 1849
Dam Height: 16 ft (5 m)
Dam Length: 100 ft (30 m)
Dam Capacity: 160,000 acre-ft (197,357 Ml)
Condition Assessment: Satisfactory

Mendota Locks Dam Map

Here is a map of Mendota Locks Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Mendota Locks Dam Information

Mendota Locks Dam is an other dam located in Madison, Dane, Wisconsin.

The dam, which is on the Yahara River, was primarily built for Navigation purposes, but also serves for Recreation benefits.

The dam was designed by and commissioned in 1849 and is currently owned by Dane County.

Mendota Locks Dam Structure

The Mendota Locks Dam is approximately 100 feet (30 m) long, 16 feet (5 m) high and has a structural volume of cubic yards (0 cubic metres).

Mendota Locks Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 132,000 acre-ft (162,819 Ml) and maximum capacity of 160,000 acre-ft (197,357 Ml).

The surface area of the reservoir is 9,730 acres (3,938 ha) and the total catchment area is 254 square miles (658 square kilometres).

Mendota Locks Dam Spillway

The dam spillway has a maximum discharge capacity of 1860 cubic feet per second (53 cubic metres per second).

Mendota Locks Dam Compared to Four Famous American Dams

Mendota Locks Dam
Dane, Wisconsin
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 16 730 550 357 216
Length (Ft) 100 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 160,000 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 254 167,800 74,100 3,611 108,355

Mendota Locks Dam Weather

Current Conditions at Mendota Locks Dam

Failed to fetch current weather data.

7-Day Forecast for Mendota Locks Dam

Failed to fetch weather forecast data.

Mendota Locks Dam Frequently Asked Questions

In which state is the Mendota Locks Dam?

Mendota Locks Dam is in Wisconsin.

In which county is the Mendota Locks Dam?

Mendota Locks Dam is in Dane County.

How high is the Mendota Locks Dam?

Mendota Locks Dam is 16 feet high.

How long is the Mendota Locks Dam?

Mendota Locks Dam is 100 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG