Murrays Dam, Wisconsin, USA

Home / USA / Wisconsin / Murrays Dam

Quick Facts About Murrays Dam

Location: Bayfield, Wisconsin
Coordinates: 46.49108, -91.34541
River: East Fork White River
Primary Purpose: Recreation
Type: Gravity Earth
Commissioned: 1941
Dam Height: 13 ft (4 m)
Dam Length: 34 ft (10 m)
Dam Capacity: 22,000 acre-ft (27,137 Ml)

Murrays Dam Map

Here is a map of Murrays Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Murrays Dam Information

Murrays Dam is a gravity earth dam located in None, Bayfield, Wisconsin.

The dam, which is on the East Fork White River, was primarily built for Recreation purposes, but also serves for benefits.

The dam was designed by and commissioned in 1941 and is currently owned by Bayfield County.

Murrays Dam Structure

The Murrays Dam is approximately 34 feet (10 m) long, 13 feet (4 m) high and has a structural volume of cubic yards (0 cubic metres).

Murrays Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 19,960 acre-ft (24,620 Ml) and maximum capacity of 22,000 acre-ft (27,137 Ml).

The surface area of the reservoir is 650 acres (263 ha) and the total catchment area is 13 square miles (34 square kilometres).

Murrays Dam Spillway

The dam spillway has a maximum discharge capacity of 260 cubic feet per second (7 cubic metres per second).

Murrays Dam Compared to Four Famous American Dams

Murrays Dam
Bayfield, Wisconsin
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 13 730 550 357 216
Length (Ft) 34 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 22,000 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 13 167,800 74,100 3,611 108,355

Murrays Dam Weather

Current Conditions at Murrays Dam

Failed to fetch current weather data.

7-Day Forecast for Murrays Dam

Failed to fetch weather forecast data.

Murrays Dam Frequently Asked Questions

In which state is the Murrays Dam?

Murrays Dam is in Wisconsin.

In which county is the Murrays Dam?

Murrays Dam is in Bayfield County.

How high is the Murrays Dam?

Murrays Dam is 13 feet high.

How long is the Murrays Dam?

Murrays Dam is 34 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG