Theresa Marsh Dam, Wisconsin, USA

Home / USA / Wisconsin / Theresa Marsh Dam

Quick Facts About Theresa Marsh Dam

Location: Dodge, Wisconsin
Coordinates: 43.524149, -88.4242195
River: East Branch Of The Rock River
Primary Purpose: Recreation
Type: Earth Other
Commissioned: 1968
Dam Height: 10 ft (3 m)
Dam Length: 5,300 ft (1,615 m)
Dam Capacity: 13,000 acre-ft (16,035 Ml)

Theresa Marsh Dam Map

Here is a map of Theresa Marsh Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Theresa Marsh Dam Information

Theresa Marsh Dam is an earth other dam located about 2 miles from Theresa, Dodge, Wisconsin.

The dam, which is on the East Branch Of The Rock River, was primarily built for Recreation purposes, but also serves for benefits.

The dam was designed by and commissioned in 1968 and is currently owned by Wisconsin Department of Natural Resources.

Theresa Marsh Dam Structure

The Theresa Marsh Dam is approximately 5,300 feet (1,615 m) long, 10 feet (3 m) high and has a structural volume of cubic yards (0 cubic metres).

Theresa Marsh Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 2,500 acre-ft (3,084 Ml) and maximum capacity of 13,000 acre-ft (16,035 Ml).

The surface area of the reservoir is 1,500 acres (607 ha) and the total catchment area is 144 square miles (373 square kilometres).

Theresa Marsh Dam Spillway

The dam spillway has a maximum discharge capacity of 8250 cubic feet per second (234 cubic metres per second).

Theresa Marsh Dam Compared to Four Famous American Dams

Theresa Marsh Dam
Dodge, Wisconsin
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 10 730 550 357 216
Length (Ft) 5,300 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 13,000 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 144 167,800 74,100 3,611 108,355

Theresa Marsh Dam Weather

Current Conditions at Theresa Marsh Dam

Failed to fetch current weather data.

7-Day Forecast for Theresa Marsh Dam

Failed to fetch weather forecast data.

Theresa Marsh Dam Frequently Asked Questions

In which state is the Theresa Marsh Dam?

Theresa Marsh Dam is in Wisconsin.

In which county is the Theresa Marsh Dam?

Theresa Marsh Dam is in Dodge County.

How high is the Theresa Marsh Dam?

Theresa Marsh Dam is 10 feet high.

How long is the Theresa Marsh Dam?

Theresa Marsh Dam is 5,300 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG