Turtle-Flambeau Dam, Wisconsin, USA

Home / USA / Wisconsin / Turtle-Flambeau Dam

Quick Facts About Turtle-Flambeau Dam

Location: Iron, Wisconsin
Coordinates: 46.0698, -90.2233
River: North Fork Flambeau River
Primary Purpose: Hydroelectric
Type: Concrete
Commissioned: 1926
Dam Height: 26 ft (8 m)
Dam Length: 9,150 ft (2,789 m)
Dam Capacity: 239,000 acre-ft (294,802 Ml)
Condition Assessment: Satisfactory

Turtle-Flambeau Dam Map

Here is a map of Turtle-Flambeau Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Turtle-Flambeau Dam Information

Turtle-Flambeau Dam is a concrete dam located about 18 miles from Park Falls, Iron, Wisconsin.

The dam, which is on the North Fork Flambeau River, was primarily built for Hydroelectric purposes, but also serves for benefits.

The dam was designed by and commissioned in 1926 and is currently owned by Chippewa and Flambeau Improvement Company.

Turtle-Flambeau Dam Structure

The Turtle-Flambeau Dam is approximately 9,150 feet (2,789 m) long, 26 feet (8 m) high and has a structural volume of cubic yards (0 cubic metres).

Turtle-Flambeau Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 135,000 acre-ft (166,520 Ml) and maximum capacity of 239,000 acre-ft (294,802 Ml).

The surface area of the reservoir is 13,798 acres (5,584 ha) and the total catchment area is 666 square miles (1,725 square kilometres).

Turtle-Flambeau Dam Spillway

The dam has a 57 feet (17 m) wide controlled spillway with a maximum discharge capacity of 16000 cubic feet per second (453 cubic metres per second).

Turtle-Flambeau Dam Compared to Four Famous American Dams

Turtle-Flambeau Dam
Iron, Wisconsin
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 26 730 550 357 216
Length (Ft) 9,150 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 239,000 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 666 167,800 74,100 3,611 108,355

Turtle-Flambeau Dam Weather

Current Conditions at Turtle-Flambeau Dam

Parameter Value
Current Time 19:26
Sunrise 05:25
Sunset 20:48
Temperature (°F) 77
Feels Like (°F) 77
Cloud Coverage (%) 70
Pressure (inHg) 1017
Humidity (%) 66
Wind Speed (mph) 6
Rain (mm) 0

7-Day Forecast for Turtle-Flambeau Dam

Day Min Temp (°F) Max Temp (°F) Feels Like (°F) Pressure (inHg) Humidity (%) Wind Speed (mph) Wind Gust (mph) Wind Dir Precip Prob (%) Precip Volume (mm) Weather
Today 63 81 80 1019 52 8 24 NE 0 - scattered clouds
Fri 67 85 81 1012 50 13 32 SSW 100 4 moderate rain
Sat 61 80 79 1011 42 13 33 NNW 100 2 light rain
Sun 58 85 82 1014 37 11 26 SSW 0 - clear sky
Mon 66 86 84 1003 60 15 34 SW 100 6 light rain
Tue 51 73 53 1012 82 15 27 N 61 1 light rain
Wed 53 77 73 1020 29 10 27 NW 0 - clear sky
Thu 52 78 68 1018 54 11 26 SW 26 0 light rain

Turtle-Flambeau Dam Frequently Asked Questions

In which state is the Turtle-Flambeau Dam?

Turtle-Flambeau Dam is in Wisconsin.

In which county is the Turtle-Flambeau Dam?

Turtle-Flambeau Dam is in Iron County.

How high is the Turtle-Flambeau Dam?

Turtle-Flambeau Dam is 26 feet high.

How long is the Turtle-Flambeau Dam?

Turtle-Flambeau Dam is 9,150 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG