Upper Beaver Dam, Wisconsin, USA

Home / USA / Wisconsin / Upper Beaver Dam

Quick Facts About Upper Beaver Dam

Location: Dodge, Wisconsin
Coordinates: 43.454353, -88.8433158
River: Beaver Dam River
Primary Purpose: Recreation
Type: Earth Other
Commissioned: 1840
Dam Height: 20 ft (6 m)
Dam Length: 100 ft (30 m)
Dam Capacity: 57,000 acre-ft (70,308 Ml)
Condition Assessment: Satisfactory

Upper Beaver Dam Map

Here is a map of Upper Beaver Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Upper Beaver Dam Information

Upper Beaver Dam is an earth other dam located in Beaver Dam, Dodge, Wisconsin.

The dam, which is on the Beaver Dam River, was primarily built for Recreation purposes, but also serves for benefits.

The dam was designed by and commissioned in 1840 and is currently owned by City Of Beaver Dam.

Upper Beaver Dam Structure

The Upper Beaver Dam is approximately 100 feet (30 m) long, 20 feet (6 m) high and has a structural volume of cubic yards (0 cubic metres).

Upper Beaver Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 30,677 acre-ft (37,839 Ml) and maximum capacity of 57,000 acre-ft (70,308 Ml).

The surface area of the reservoir is 6,542 acres (2,647 ha) and the total catchment area is 157 square miles (407 square kilometres).

Upper Beaver Dam Spillway

The dam spillway has a maximum discharge capacity of 750 cubic feet per second (21 cubic metres per second).

Upper Beaver Dam Compared to Four Famous American Dams

Upper Beaver Dam
Dodge, Wisconsin
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 20 730 550 357 216
Length (Ft) 100 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 57,000 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 157 167,800 74,100 3,611 108,355

Upper Beaver Dam Weather

Current Conditions at Upper Beaver Dam

Failed to fetch current weather data.

7-Day Forecast for Upper Beaver Dam

Failed to fetch weather forecast data.

Upper Beaver Dam Frequently Asked Questions

In which state is the Upper Beaver Dam?

Upper Beaver Dam is in Wisconsin.

In which county is the Upper Beaver Dam?

Upper Beaver Dam is in Dodge County.

How high is the Upper Beaver Dam?

Upper Beaver Dam is 20 feet high.

How long is the Upper Beaver Dam?

Upper Beaver Dam is 100 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG