Anchor Dam, Wyoming, USA

Home / USA / Wyoming / Anchor Dam

Quick Facts About Anchor Dam

Location: Hot Springs, Wyoming
Coordinates: 43.6639, -108.8245
River: South Fork Owl Creek River
Primary Purpose: Irrigation
Type: Concrete Arch
Commissioned: 1959
Dam Height: 208 ft (63 m)
Dam Length: 660 ft (201 m)
Dam Capacity: 22,390 acre-ft (27,618 Ml)
Condition Assessment: Not Available

Anchor Dam Map

Here is a map of Anchor Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Anchor Dam Information

Anchor Dam is a concrete arch dam located about 8 miles from Embar, Hot Springs, Wyoming.

The dam, which is on the South Fork Owl Creek River, was primarily built for Irrigation purposes, but also serves for benefits.

The dam was designed by DON M FORESTER and commissioned in 1959 and is currently owned by US Bureau of Reclamation.

Anchor Dam Structure

The Anchor Dam is approximately 660 feet (201 m) long, 208 feet (63 m) high and has a structural volume of 66,000 cubic yards (50,461 cubic metres).

Anchor Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 17,354 acre-ft (21,406 Ml) and maximum capacity of 22,390 acre-ft (27,618 Ml).

The surface area of the reservoir is 437 acres (177 ha) and the total catchment area is 131 square miles (339 square kilometres).

Anchor Dam Spillway

The dam has a 100 feet (30 m) wide uncontrolled spillway with a maximum discharge capacity of 13500 cubic feet per second (382 cubic metres per second).

Anchor Dam Compared to Four Famous American Dams

Anchor Dam
Hot Springs, Wyoming
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 208 730 550 357 216
Length (Ft) 660 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 22,390 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 131 167,800 74,100 3,611 108,355

Anchor Dam Weather

Current Conditions at Anchor Dam

Failed to fetch current weather data.

7-Day Forecast for Anchor Dam

Failed to fetch weather forecast data.

Anchor Dam Frequently Asked Questions

In which state is the Anchor Dam?

Anchor Dam is in Wyoming.

In which county is the Anchor Dam?

Anchor Dam is in Hot Springs County.

How high is the Anchor Dam?

Anchor Dam is 208 feet high.

How long is the Anchor Dam?

Anchor Dam is 660 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG