Bates Creek Dam, Wyoming, USA

Home / USA / Wyoming / Bates Creek Dam

Quick Facts About Bates Creek Dam

Location: Natrona, Wyoming
Coordinates: 42.489444, -106.218056
River: Dry Fork Bates Creek River
Primary Purpose: Irrigation
Type: Earth
Commissioned: 1910
Dam Height: 23 ft (7 m)
Dam Length: 4,393 ft (1,339 m)
Dam Capacity: 8,885 acre-ft (10,959 Ml)
Hazard Potential: Significant

Bates Creek Dam Map

Here is a map of Bates Creek Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Bates Creek Dam Information

Bates Creek Dam is an earthen embankment dam located about 44 miles from Casper, Natrona, Wyoming.

The dam, which is on the Dry Fork Bates Creek River, was primarily built for Irrigation purposes, but also serves for benefits.

The dam was designed by and commissioned in 1910 and is currently owned by BATES CREEK RES. CO. – STEVE GARRETT.

Bates Creek Dam Structure

The Bates Creek Dam is approximately 4,393 feet (1,339 m) long, 23 feet (7 m) high and has a structural volume of 39,900 cubic yards (30,506 cubic metres).

Bates Creek Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 3,112 acre-ft (3,839 Ml) and maximum capacity of 8,885 acre-ft (10,959 Ml).

The surface area of the reservoir is 786 acres (318 ha) and the total catchment area is 33 square miles (86 square kilometres).

Bates Creek Dam Spillway

The dam has a 75 feet (23 m) wide uncontrolled spillway with a maximum discharge capacity of 4000 cubic feet per second (113 cubic metres per second).

Bates Creek Dam Compared to Four Famous American Dams

Bates Creek Dam
Natrona, Wyoming
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 23 730 550 357 216
Length (Ft) 4,393 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 8,885 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 33 167,800 74,100 3,611 108,355

Bates Creek Dam Weather

Current Conditions at Bates Creek Dam

Failed to fetch current weather data.

7-Day Forecast for Bates Creek Dam

Failed to fetch weather forecast data.

Bates Creek Dam Frequently Asked Questions

In which state is the Bates Creek Dam?

Bates Creek Dam is in Wyoming.

In which county is the Bates Creek Dam?

Bates Creek Dam is in Natrona County.

How high is the Bates Creek Dam?

Bates Creek Dam is 23 feet high.

How long is the Bates Creek Dam?

Bates Creek Dam is 4,393 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG