Buffalo Bill Dam

Buffalo Bill Dam Quick Facts

Location: Park, Wyoming
Coordinates: 44.501449, -109.183144
River: Shoshone River
Primary Purpose: Fish and Wildlife Pond
Type: Concrete Arch
Commissioned: 1905
Dam Height: 350 ft (107 m)
Dam Length: 200 ft (61 m)
Dam Capacity: 644,540 acre-ft (795,027 Ml)
Condition Assessment: Not Available
Share Buffalo Bill Dam:

Buffalo Bill Dam Map

Buffalo Bill Dam Information

Buffalo Bill Dam is a concrete arch dam located about 7 miles from Cody, Park, Wyoming.

The dam, which is on the Shoshone River, was primarily built for Fish and Wildlife Pond purposes, but also serves for Irrigation, Recreation, Hydroelectric and Water Supply benefits.

The dam was designed by and commissioned in 1905 and is currently owned by US Bureau of Reclamation.

Buffalo Bill Dam Structure

The Buffalo Bill Dam is approximately 200 feet (61 m) long, 350 feet (107 m) high and has a structural volume of 84,750 cubic yards (64,796 cubic metres).

Buffalo Bill Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 646,565 acre-ft (797,525 Ml) and maximum capacity of 644,540 acre-ft (795,027 Ml).

The surface area of the reservoir is 8,324 acres (3,369 ha) and the total catchment area is 1,504 square miles (3,895 square kilometres).

Buffalo Bill Dam Spillway

The dam has a 240 feet (73 m) wide controlled spillway with a maximum discharge capacity of 75980 cubic feet per second (2152 cubic metres per second).

Buffalo Bill Dam Compared to Five Famous American Dams

Height (ft)
Length (Ft)
Storage Volume (acre-ft)
Drainage Area (sq miles)
 
Buffalo Bill Dam
Park, Wyoming
Height (ft)
350
Length (Ft)
200
Storage Volume (acre-ft)
644,540
Drainage Area (sq miles)
1,504
Hoover Dam
Clark County, Nevada
Height (ft)
730
Length (Ft)
1,244
Storage Volume (acre-ft)
30,237,000
Drainage Area (sq miles)
167,800
Grand Coulee Dam
Okanogan County, Washington
Height (ft)
550
Length (Ft)
5,673
Storage Volume (acre-ft)
9,562,0000
Drainage Area (sq miles)
74,100
Theodore Roosevelt Dam
Maricopa County, Arizona
Height (ft)
357
Length (Ft)
1,208
Storage Volume (acre-ft)
3,411,500
Drainage Area (sq miles)
5,736
Oroville Dam
Butte County, California
Height (ft)
235
Length (Ft)
6,920
Storage Volume (acre-ft)
3,540,000
Drainage Area (sq miles)
3,611
Glen Canyon Dam
Coconino County, Arizona
Height (ft)
216
Length (Ft)
1,565
Storage Volume (acre-ft)
29,875,000
Drainage Area (sq miles)
108,355

Buffalo Bill Dam Weather

Current Conditions at Buffalo Bill Dam

Failed to fetch current weather data.

7-Day Forecast for Buffalo Bill Dam

Failed to fetch weather forecast data.

Buffalo Bill Dam Frequently Asked Questions

In which state is the Buffalo Bill Dam?

Buffalo Bill Dam is in Wyoming.

In which county is the Buffalo Bill Dam?

Buffalo Bill Dam is in Park County.

How high is the Buffalo Bill Dam?

Buffalo Bill Dam is 350 feet high.

How long is the Buffalo Bill Dam?

Buffalo Bill Dam is 200 feet long.

Share Buffalo Bill Dam:

More Dams in Park County:

Antero Dam
Buffalo Bill Dam
Eleven Mile Canyon Dam
Greybull Valley (1st Enl.) Dam
Lake Mineral Wells Dam
Lake Weatherford Dam
Little Raccoon Dam No. 12
Little Raccoon Dam No. 12b
Lower Sunshine Dam
Montgomery Dam
Robinson Tailings Pond #2 Dam
Spinney Mountain Dam
Upper Sunshine Dam

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG