Granite Springs Dam, Wyoming, USA

Home / USA / Wyoming / Granite Springs Dam

Quick Facts About Granite Springs Dam

Location: Laramie, Wyoming
Coordinates: 41.176667, -105.223333
River: Middle Crow Creek River
Primary Purpose: Water Supply
Type: Masonry Arch
Commissioned: 1904
Dam Height: 90 ft (27 m)
Dam Length: 423 ft (129 m)
Dam Capacity: 5,780 acre-ft (7,130 Ml)

Granite Springs Dam Map

Here is a map of Granite Springs Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Granite Springs Dam Information

Granite Springs Dam is a masonry arch dam located about 35 miles from Cheyenne, Laramie, Wyoming.

The dam, which is on the Middle Crow Creek River, was primarily built for Water Supply purposes, but also serves for benefits.

The dam was designed by and commissioned in 1904 and is currently owned by CITY OF CHEYENNE-CBPU.

Granite Springs Dam Structure

The Granite Springs Dam is approximately 423 feet (129 m) long, 90 feet (27 m) high and has a structural volume of cubic yards (0 cubic metres).

Granite Springs Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 5,220 acre-ft (6,439 Ml) and maximum capacity of 5,780 acre-ft (7,130 Ml).

The surface area of the reservoir is 190 acres (77 ha) and the total catchment area is 28 square miles (74 square kilometres).

Granite Springs Dam Spillway

The dam has a 20 feet (6 m) wide uncontrolled spillway with a maximum discharge capacity of 29800 cubic feet per second (844 cubic metres per second).

Granite Springs Dam Compared to Four Famous American Dams

Granite Springs Dam
Laramie, Wyoming
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 90 730 550 357 216
Length (Ft) 423 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 5,780 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 28 167,800 74,100 3,611 108,355

Granite Springs Dam Weather

Current Conditions at Granite Springs Dam

Failed to fetch current weather data.

7-Day Forecast for Granite Springs Dam

Failed to fetch weather forecast data.

Granite Springs Dam Frequently Asked Questions

In which state is the Granite Springs Dam?

Granite Springs Dam is in Wyoming.

In which county is the Granite Springs Dam?

Granite Springs Dam is in Laramie County.

How high is the Granite Springs Dam?

Granite Springs Dam is 90 feet high.

How long is the Granite Springs Dam?

Granite Springs Dam is 423 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG