Shoshone Lake Dam, Wyoming, USA

Home / USA / Wyoming / Shoshone Lake Dam

Quick Facts About Shoshone Lake Dam

Location: Fremont, Wyoming
Coordinates: 42.794722, -109.0175
River: Shoshone Creek River
Primary Purpose: Irrigation
Type: Earth
Commissioned: 1959
Dam Height: 37 ft (11 m)
Dam Length: 410 ft (125 m)
Dam Capacity: 12,900 acre-ft (15,912 Ml)

Shoshone Lake Dam Map

Here is a map of Shoshone Lake Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Shoshone Lake Dam Information

Shoshone Lake Dam is an earthen embankment dam located about 16 miles from Milford, Fremont, Wyoming.

The dam, which is on the Shoshone Creek River, was primarily built for Irrigation purposes, but also serves for benefits.

The dam was designed by CE DENNIS;USDA NRCS and commissioned in 1959 and is currently owned by SHOSHONE LAKE RESERVOIR COMPANY.

Shoshone Lake Dam Structure

The Shoshone Lake Dam is approximately 410 feet (125 m) long, 37 feet (11 m) high and has a structural volume of 22,410 cubic yards (17,134 cubic metres).

Shoshone Lake Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 10,109 acre-ft (12,469 Ml) and maximum capacity of 12,900 acre-ft (15,912 Ml).

The surface area of the reservoir is 503 acres (204 ha) and the total catchment area is 11 square miles (28 square kilometres).

Shoshone Lake Dam Spillway

The dam has a 30 feet (9 m) wide uncontrolled spillway with a maximum discharge capacity of 741 cubic feet per second (21 cubic metres per second).

Shoshone Lake Dam Compared to Four Famous American Dams

Shoshone Lake Dam
Fremont, Wyoming
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 37 730 550 357 216
Length (Ft) 410 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 12,900 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 11 167,800 74,100 3,611 108,355

Shoshone Lake Dam Weather

Current Conditions at Shoshone Lake Dam

Parameter Value
Current Time 18:29
Sunrise 05:51
Sunset 20:51
Temperature (°F) 68
Feels Like (°F) 67
Cloud Coverage (%) 100
Pressure (inHg) 1013
Humidity (%) 42
Wind Speed (mph) 4
Rain (mm) 0

7-Day Forecast for Shoshone Lake Dam

Day Min Temp (°F) Max Temp (°F) Feels Like (°F) Pressure (inHg) Humidity (%) Wind Speed (mph) Wind Gust (mph) Wind Dir Precip Prob (%) Precip Volume (mm) Weather
Today 53 74 73 1014 42 6 7 ENE 100 8 moderate rain
Fri 56 83 72 1017 47 7 10 E 88 1 light rain
Sat 58 78 72 1015 37 6 7 WSW 100 1 light rain
Sun 60 78 70 1015 45 6 7 SW 46 0 light rain
Mon 59 75 74 1014 35 8 7 WSW 37 1 light rain
Tue 51 71 65 1022 53 8 19 ENE 100 4 light rain
Wed 58 69 68 1018 54 8 7 SW 100 10 light rain
Thu 54 65 64 1019 70 5 7 NE 100 21 moderate rain

Shoshone Lake Dam Frequently Asked Questions

In which state is the Shoshone Lake Dam?

Shoshone Lake Dam is in Wyoming.

In which county is the Shoshone Lake Dam?

Shoshone Lake Dam is in Fremont County.

How high is the Shoshone Lake Dam?

Shoshone Lake Dam is 37 feet high.

How long is the Shoshone Lake Dam?

Shoshone Lake Dam is 410 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG