Theodore Roosevelt Dam, Arizona, USA

Quick Facts About Theodore Roosevelt Dam

Location: Maricopa, Arizona
Coordinates: 33.6715, -111.1615
River: Salt River
Primary Purpose: Hydroelectric
Type: Masonry Arch
Commissioned: 1911
Dam Height: 357 ft (109 m)
Dam Length: 1,208 ft (368 m)
Dam Capacity: 3,411,500 acre-ft (4,208,017 Ml)
Condition Assessment: Not Available

Theodore Roosevelt Dam Map

Here is a map of Theodore Roosevelt Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Theodore Roosevelt Dam Information

Theodore Roosevelt Dam is a masonry arch dam located about 30 miles from Globe, Maricopa, Arizona.

The dam, which is on the Salt River, was primarily built for Hydroelectric purposes, but also serves for Irrigation and Recreation benefits.

The dam was designed by US Bureau of Reclamation and commissioned in 1911 and is currently owned by US Bureau of Reclamation.

Theodore Roosevelt Dam Structure

The Theodore Roosevelt Dam is approximately 1,208 feet (368 m) long, 357 feet (109 m) high and has a structural volume of 720,000 cubic yards (550,480 cubic metres).

Theodore Roosevelt Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 1,653,043 acre-ft (2,038,995 Ml) and maximum capacity of 3,411,500 acre-ft (4,208,017 Ml).

The surface area of the reservoir is 31,852 acres (12,890 ha) and the total catchment area is 5,736 square miles (14,856 square kilometres).

Theodore Roosevelt Dam Spillway

The dam has a 268 feet (82 m) wide controlled spillway with a maximum discharge capacity of 150000 cubic feet per second (4248 cubic metres per second).

Theodore Roosevelt Dam Compared to Four Famous American Dams

Theodore Roosevelt Dam
Maricopa, Arizona
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 357 730 550 357 216
Length (Ft) 1,208 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 3,411,500 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 5,736 167,800 74,100 3,611 108,355

Theodore Roosevelt Dam Weather

Current Conditions at Theodore Roosevelt Dam

Failed to fetch current weather data.

7-Day Forecast for Theodore Roosevelt Dam

Failed to fetch weather forecast data.

Theodore Roosevelt Dam Frequently Asked Questions

In which state is the Theodore Roosevelt Dam?

Theodore Roosevelt Dam is in Arizona.

In which county is the Theodore Roosevelt Dam?

Theodore Roosevelt Dam is in Maricopa County.

How high is the Theodore Roosevelt Dam?

Theodore Roosevelt Dam is 357 feet high.

How long is the Theodore Roosevelt Dam?

Theodore Roosevelt Dam is 1,208 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG