Rose Valley Lake Dam, Pennsylvania, USA

Home / USA / Pennsylvania / Rose Valley Lake Dam

Quick Facts About Rose Valley Lake Dam

Location: Lycoming, Pennsylvania
Coordinates: 41.386389, -76.9977778
River: Mill Creek River
Primary Purpose: Recreation
Type: Earth
Commissioned: 1972
Dam Height: 26 ft (8 m)
Dam Length: 516 ft (157 m)
Dam Capacity: 6,500 acre-ft (8,018 Ml)

Rose Valley Lake Dam Map

Here is a map of Rose Valley Lake Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Rose Valley Lake Dam Information

Rose Valley Lake Dam is an earthen embankment dam located in Lycoming County, Pennsylvania.

The dam, which is on the Mill Creek River, was primarily built for Recreation purposes, but also serves for benefits.

The dam was designed by and commissioned in 1972 and is currently owned by PA FISH & BOAT COMMISSION.

Rose Valley Lake Dam Structure

The Rose Valley Lake Dam is approximately 516 feet (157 m) long, 26 feet (8 m) high and has a structural volume of cubic yards (0 cubic metres).

Rose Valley Lake Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 3,940 acre-ft (4,860 Ml) and maximum capacity of 6,500 acre-ft (8,018 Ml).

The surface area of the reservoir is 389 acres (157 ha) and the total catchment area is 3 square miles (9 square kilometres).

Rose Valley Lake Dam Spillway

According to the latest available data, the Rose Valley Lake Dam does not have any spillways.

Rose Valley Lake Dam Compared to Four Famous American Dams

Rose Valley Lake Dam
Lycoming, Pennsylvania
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 26 730 550 357 216
Length (Ft) 516 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 6,500 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 3 167,800 74,100 3,611 108,355

Rose Valley Lake Dam Weather

Current Conditions at Rose Valley Lake Dam

Failed to fetch current weather data.

7-Day Forecast for Rose Valley Lake Dam

Failed to fetch weather forecast data.

Rose Valley Lake Dam Frequently Asked Questions

In which state is the Rose Valley Lake Dam?

Rose Valley Lake Dam is in Pennsylvania.

In which county is the Rose Valley Lake Dam?

Rose Valley Lake Dam is in Lycoming County.

How high is the Rose Valley Lake Dam?

Rose Valley Lake Dam is 26 feet high.

How long is the Rose Valley Lake Dam?

Rose Valley Lake Dam is 516 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG