Stevens Point Dam, Wisconsin, USA

Quick Facts About Stevens Point Dam

Location: Portage, Wisconsin
Coordinates: 44.5161, -89.586
River: Wisconsin River
Primary Purpose: Hydroelectric
Type: Gravity Earth
Commissioned: 1916
Dam Height: 26 ft (8 m)
Dam Length: 4,770 ft (1,454 m)
Dam Capacity: 27,000 acre-ft (33,304 Ml)
Condition Assessment: Satisfactory

Stevens Point Dam Map

Here is a map of Stevens Point Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Stevens Point Dam Information

Stevens Point Dam is a gravity earth dam located in Stevens Point, Portage, Wisconsin.

The dam, which is on the Wisconsin River, was primarily built for Hydroelectric purposes, but also serves for Recreation, Water Supply and Flood Risk Reduction benefits.

The dam was designed by L. A. DE GUENE, GRAND RAPIDS WISC and commissioned in 1916 and is currently owned by Consolidated Water Power Company.

Stevens Point Dam Structure

The Stevens Point Dam is approximately 4,770 feet (1,454 m) long, 26 feet (8 m) high and has a structural volume of cubic yards (0 cubic metres).

Stevens Point Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 27,000 acre-ft (33,304 Ml) and maximum capacity of 27,000 acre-ft (33,304 Ml).

The surface area of the reservoir is 3,915 acres (1,584 ha) and the total catchment area is 4,964 square miles (12,857 square kilometres).

Stevens Point Dam Spillway

The dam spillway has a maximum discharge capacity of 140000 cubic feet per second (3964 cubic metres per second).

Stevens Point Dam Compared to Four Famous American Dams

Stevens Point Dam
Portage, Wisconsin
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 26 730 550 357 216
Length (Ft) 4,770 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 27,000 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 4,964 167,800 74,100 3,611 108,355

Stevens Point Dam Weather

Current Conditions at Stevens Point Dam

Failed to fetch current weather data.

7-Day Forecast for Stevens Point Dam

Failed to fetch weather forecast data.

Stevens Point Dam Frequently Asked Questions

In which state is the Stevens Point Dam?

Stevens Point Dam is in Wisconsin.

In which county is the Stevens Point Dam?

Stevens Point Dam is in Portage County.

How high is the Stevens Point Dam?

Stevens Point Dam is 26 feet high.

How long is the Stevens Point Dam?

Stevens Point Dam is 4,770 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG