Barney Dam, Oregon, USA

Quick Facts About Barney Dam

Location: Washington, Oregon
Coordinates: 45.448392, -123.393511
River: M. Fork Of North Fork Trask River
Primary Purpose: Water Supply
Type: Other
Commissioned: 1998
Dam Height: 122 ft (37 m)
Dam Length: 2,500 ft (762 m)
Dam Capacity: 20,000 acre-ft (24,670 Ml)
Condition Assessment: Satisfactory

Barney Dam Map

Here is a map of Barney Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Barney Dam Information

Barney Dam is an other dam located about 30 miles from Tillamook, Washington, Oregon.

The dam, which is on the M. Fork Of North Fork Trask River, was primarily built for Water Supply purposes, but also serves for benefits.

The dam was designed by and commissioned in 1998 and is currently owned by CITY OF HILLSBORO.

Barney Dam Structure

The Barney Dam is approximately 2,500 feet (762 m) long, 122 feet (37 m) high and has a structural volume of 100 cubic yards (76 cubic metres).

Barney Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 20,000 acre-ft (24,670 Ml) and maximum capacity of 20,000 acre-ft (24,670 Ml).

The surface area of the reservoir is 455 acres (184 ha) and the total catchment area is 8 square miles (21 square kilometres).

Barney Dam Spillway

The dam spillway has a maximum discharge capacity of 7780 cubic feet per second (220 cubic metres per second).

Barney Dam Compared to Four Famous American Dams

Barney Dam
Washington, Oregon
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 122 730 550 357 216
Length (Ft) 2,500 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 20,000 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 8 167,800 74,100 3,611 108,355

Barney Dam Weather

Current Conditions at Barney Dam

Failed to fetch current weather data.

7-Day Forecast for Barney Dam

Failed to fetch weather forecast data.

Barney Dam Frequently Asked Questions

In which state is the Barney Dam?

Barney Dam is in Oregon.

In which county is the Barney Dam?

Barney Dam is in Washington County.

How high is the Barney Dam?

Barney Dam is 122 feet high.

How long is the Barney Dam?

Barney Dam is 2,500 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG