Long Lake Dam, Washington, USA

Quick Facts About Long Lake Dam

Location: Stevens, Washington
Coordinates: 47.8371, -117.8387
River: Spokane River
Primary Purpose: Hydroelectric
Type: Gravity Concrete
Commissioned: 1915
Dam Height: 213 ft (65 m)
Dam Length: 593 ft (181 m)
Dam Capacity: acre-ft (0 Ml)

Long Lake Dam Map

Here is a map of Long Lake Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Long Lake Dam Information

Long Lake Dam is a gravity concrete dam located about 5 miles from Long Lake Op Village, Stevens, Washington.

The dam, which is on the Spokane River, was primarily built for Hydroelectric purposes, but also serves for Fish and Wildlife Pond and Recreation benefits.

The dam was designed by Washington Water Power and commissioned in 1915 and is currently owned by Avista Corporation.

Long Lake Dam Structure

The Long Lake Dam is approximately 593 feet (181 m) long, 213 feet (65 m) high and has a structural volume of cubic yards (0 cubic metres).

Long Lake Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 105,080 acre-ft (129,614 Ml) and maximum capacity of acre-ft (0 Ml).

The surface area of the reservoir is 5,060 acres (2,048 ha) and the total catchment area is 5,844 square miles (15,136 square kilometres).

Long Lake Dam Spillway

The dam has a 353 feet (108 m) wide controlled spillway with a maximum discharge capacity of 269200 cubic feet per second (7623 cubic metres per second).

Long Lake Dam Compared to Four Famous American Dams

Long Lake Dam
Stevens, Washington
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 213 730 550 357 216
Length (Ft) 593 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 5,844 167,800 74,100 3,611 108,355

Long Lake Dam Weather

Current Conditions at Long Lake Dam

Failed to fetch current weather data.

7-Day Forecast for Long Lake Dam

Failed to fetch weather forecast data.

Long Lake Dam Frequently Asked Questions

In which state is the Long Lake Dam?

Long Lake Dam is in Washington.

In which county is the Long Lake Dam?

Long Lake Dam is in Stevens County.

How high is the Long Lake Dam?

Long Lake Dam is 213 feet high.

How long is the Long Lake Dam?

Long Lake Dam is 593 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG