Clinton Gulch Dam, Colorado, USA

Quick Facts About Clinton Gulch Dam

Location: Summit, Colorado
Coordinates: 39.415568, -106.176685
River: Tenmile Creek River
Primary Purpose: Water Supply
Type: Earth
Commissioned: 1977
Dam Height: 170 ft (52 m)
Dam Length: 1,550 ft (472 m)
Dam Capacity: 5,915 acre-ft (7,296 Ml)
Condition Assessment: Satisfactory

Clinton Gulch Dam Map

Here is a map of Clinton Gulch Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Clinton Gulch Dam Information

Clinton Gulch Dam is an earthen embankment dam located about 14 miles from Frisco, Summit, Colorado.

The dam, which is on the Tenmile Creek River, was primarily built for Water Supply purposes, but also serves for Recreation benefits.

The dam was designed by WOODWARD CLYDE and commissioned in 1977 and is currently owned by CLINTON DITCH & RES CO (HODSON, LIZ).

Clinton Gulch Dam Structure

The Clinton Gulch Dam is approximately 1,550 feet (472 m) long, 170 feet (52 m) high and has a structural volume of 1,971,370 cubic yards (1,507,221 cubic metres).

Clinton Gulch Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 4,372 acre-ft (5,393 Ml) and maximum capacity of 5,915 acre-ft (7,296 Ml).

The surface area of the reservoir is 95 acres (38 ha) and the total catchment area is 4 square miles (10 square kilometres).

Clinton Gulch Dam Spillway

The dam has a 6 feet (2 m) wide controlled spillway with a maximum discharge capacity of 659 cubic feet per second (19 cubic metres per second).

Clinton Gulch Dam Compared to Four Famous American Dams

Clinton Gulch Dam
Summit, Colorado
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 170 730 550 357 216
Length (Ft) 1,550 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 5,915 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 4 167,800 74,100 3,611 108,355

Clinton Gulch Dam Weather

Current Conditions at Clinton Gulch Dam

Failed to fetch current weather data.

7-Day Forecast for Clinton Gulch Dam

Failed to fetch weather forecast data.

Clinton Gulch Dam Frequently Asked Questions

In which state is the Clinton Gulch Dam?

Clinton Gulch Dam is in Colorado.

In which county is the Clinton Gulch Dam?

Clinton Gulch Dam is in Summit County.

How high is the Clinton Gulch Dam?

Clinton Gulch Dam is 170 feet high.

How long is the Clinton Gulch Dam?

Clinton Gulch Dam is 1,550 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG