Williams Fork Main Dam, Colorado, USA

Home / USA / Colorado / Williams Fork Main Dam

Quick Facts About Williams Fork Main Dam

Location: Grand, Colorado
Coordinates: 40.0349, -106.2053
River: Williams Fork River
Primary Purpose: Water Supply
Type: Concrete Arch
Commissioned: 1959
Dam Height: 209 ft (64 m)
Dam Length: 674 ft (205 m)
Dam Capacity: 96,800 acre-ft (119,401 Ml)
Condition Assessment: Satisfactory

Williams Fork Main Dam Map

Here is a map of Williams Fork Main Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Williams Fork Main Dam Information

Williams Fork Main Dam is a concrete arch dam located about 2 miles from Parshall, Grand, Colorado.

The dam, which is on the Williams Fork River, was primarily built for Water Supply purposes, but also serves for Recreation and Hydroelectric benefits.

The dam was designed by and commissioned in 1959 and is currently owned by Denver Water.

Williams Fork Main Dam Structure

The Williams Fork Main Dam is approximately 674 feet (205 m) long, 209 feet (64 m) high and has a structural volume of cubic yards (0 cubic metres).

Williams Fork Main Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 96,800 acre-ft (119,401 Ml) and maximum capacity of 96,800 acre-ft (119,401 Ml).

The surface area of the reservoir is 1,700 acres (688 ha) and the total catchment area is 230 square miles (596 square kilometres).

Williams Fork Main Dam Spillway

The dam has a 7811 feet (2381 m) wide controlled spillway with a maximum discharge capacity of 7725 cubic feet per second (219 cubic metres per second).

Williams Fork Main Dam Compared to Four Famous American Dams

Williams Fork Main Dam
Grand, Colorado
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 209 730 550 357 216
Length (Ft) 674 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 96,800 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 230 167,800 74,100 3,611 108,355

Williams Fork Main Dam Weather

Current Conditions at Williams Fork Main Dam

Parameter Value
Current Time 20:29
Sunrise 06:25
Sunset 19:43
Temperature (°F) 49
Feels Like (°F) 43
Cloud Coverage (%) 0
Pressure (inHg) 1004
Humidity (%) 19
Wind Speed (mph) 17
Rain (mm) 0

7-Day Forecast for Williams Fork Main Dam

Day Min Temp (°F) Max Temp (°F) Feels Like (°F) Pressure (inHg) Humidity (%) Wind Speed (mph) Wind Gust (mph) Wind Dir Precip Prob (%) Precip Volume (mm) Weather
Today 39 64 59 1004 20 29 43 WSW 0 - few clouds
Fri 19 50 16 1020 49 22 24 NW 100 - snow
Sat 18 44 31 1022 26 13 19 W 1 - clear sky
Sun 25 57 49 1016 15 12 17 WSW 0 - clear sky
Mon 35 59 53 1015 24 14 16 NW 0 - overcast clouds
Tue 40 65 57 1015 24 11 11 WSW 20 0 light rain
Wed 42 64 58 1005 17 29 41 WSW 37 0 light rain
Thu 38 54 46 1003 23 24 38 WSW 0 - clear sky

Williams Fork Main Dam Frequently Asked Questions

In which state is the Williams Fork Main Dam?

Williams Fork Main Dam is in Colorado.

In which county is the Williams Fork Main Dam?

Williams Fork Main Dam is in Grand County.

How high is the Williams Fork Main Dam?

Williams Fork Main Dam is 209 feet high.

How long is the Williams Fork Main Dam?

Williams Fork Main Dam is 674 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG