Pleasant Creek Lake Dam, Iowa, USA

Home / USA / Iowa / Pleasant Creek Lake Dam

Quick Facts About Pleasant Creek Lake Dam

Location: Linn, Iowa
Coordinates: 42.1257, -91.8104
River: Pleasant Creek River
Primary Purpose: Flood Risk Reduction
Type: Earth
Commissioned: 1977
Dam Height: 73 ft (22 m)
Dam Length: 2,450 ft (747 m)
Dam Capacity: 11,000 acre-ft (13,568 Ml)
Condition Assessment: Satisfactory

Pleasant Creek Lake Dam Map

Here is a map of Pleasant Creek Lake Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Pleasant Creek Lake Dam Information

Pleasant Creek Lake Dam is an earthen embankment dam located about 6 miles from Palo, Linn, Iowa.

The dam, which is on the Pleasant Creek River, was primarily built for Flood Risk Reduction purposes, but also serves for Water Supply benefits.

The dam was designed by SHIVE HATTERY & ASSOC and commissioned in 1977 and is currently owned by Iowa Department of Natural Resources.

Pleasant Creek Lake Dam Structure

The Pleasant Creek Lake Dam is approximately 2,450 feet (747 m) long, 73 feet (22 m) high and has a structural volume of 433,832 cubic yards (331,688 cubic metres).

Pleasant Creek Lake Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 7,100 acre-ft (8,758 Ml) and maximum capacity of 11,000 acre-ft (13,568 Ml).

The surface area of the reservoir is 410 acres (166 ha) and the total catchment area is 4 square miles (10 square kilometres).

Pleasant Creek Lake Dam Spillway

The dam has a 4 feet (1 m) wide uncontrolled spillway with a maximum discharge capacity of 0 cubic feet per second (0 cubic metres per second).

Pleasant Creek Lake Dam Compared to Four Famous American Dams

Pleasant Creek Lake Dam
Linn, Iowa
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 73 730 550 357 216
Length (Ft) 2,450 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 11,000 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 4 167,800 74,100 3,611 108,355

Pleasant Creek Lake Dam Weather

Current Conditions at Pleasant Creek Lake Dam

Failed to fetch current weather data.

7-Day Forecast for Pleasant Creek Lake Dam

Failed to fetch weather forecast data.

Pleasant Creek Lake Dam Frequently Asked Questions

In which state is the Pleasant Creek Lake Dam?

Pleasant Creek Lake Dam is in Iowa.

In which county is the Pleasant Creek Lake Dam?

Pleasant Creek Lake Dam is in Linn County.

How high is the Pleasant Creek Lake Dam?

Pleasant Creek Lake Dam is 73 feet high.

How long is the Pleasant Creek Lake Dam?

Pleasant Creek Lake Dam is 2,450 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG